ENGINE 273 MPFI 211 ENGINE CAUTION 6. Connect negative terminal at battery. 7. Turn ignition switch ON and run engine in idle condition. Check for fuel leakages. Fuel Level Indicator Testing and Checking Procedure When the ignition switch is ‘ON’ position, fuel level indicator gives an approximate indication of the amount of fuel in the fuel tank. “F” stands for full and “E” stands for empty. When indicator shows two levels, it indicates fuel level in the tank is low & needs immediate refill. • Check fuel level indicator on instrument cluster for operation as follows: a) Pullout the wiring harness connector on tank unit. b) Disconnect the connector and check fuel level indicator on instrument cluster. It shows empty with ignition ON. c) By shorting the two wires. Brown and violet of wiring harness connector the fuel gauge will show full. If fuel level indicator shows full, reconnect wires and check for fuel module. If not check fuse wiring connector. If OK, replace fuel gauge and retest.
RkJQdWJsaXNoZXIy MTIwNTUz