202 ENGINE 273 MPFI SYSTEM MAINTENANCE Fuel Tank Removal: Procedure to release fuel system pressure: i. Start engine. ii. Disconnect the fuel tank unit’s (fuel module) electrical connector located under center floor carpet. iii. Let engine stall, then turn “OFF” ignition switch. iv. Reconnect fuel tank unit’s (fuel module) electrical connector. Removal of fuel tank from vehicle: • Access fuel tank unit from inside car i.e.below codriver seat. • Fold carpet cutout and remove plastic cover which has snap fit lugs • Disconnect electrical connector of fuel tank unit. • Releasing fuel system pressure Do not drain or store fuel in an open container to avoid possibility of fire or explosion. Put lid on container. CAUTION WARNING Since the fuel system remains under pressure when the engine is not running, release the fuel system pressure before disconnecting any fuel line to reduce the chance of personal injury or fire damage to vehicle components. • Disconnect the clamp between filler, breather hose pipe & middle metal pipe. • Remove all the three pipe lines of fuel tank unit i.e. Fuel feed Line, Fuel return Line, Fuel vapour line. • De-clamp fuel hoses using plier .
RkJQdWJsaXNoZXIy MTIwNTUz