ENGINE 273 MPFI 187 ENGINE Refitment Procedure: • Fit the oil strainer on water & oil pump housing by tightening two hexagonal mounting bolts as shown in fig. • Clean the liquid gasket surface on oil &water pump housing using knife type tool. • Clean the liquid gasket surface on engine block using knife type tool. CAUTION Ensure that the liquid gasket surface on water & oil pump housing and Engine block is completely cleaned. Otherwise it will cause serious leakage and or water contamination in oil or vice versa which will cause serious engine damage like engine seizure. • Clean the liquid gasket on bottom surface of engine block using knife type tool. • ApplySEALANT LOCTITE 5182 red colour on water and oil pump assembly gasket area to ensure leak proof joint. CAUTION Gasket eliminator anaerobic product cures in the absence of air. Clean parts for best results. Apply continous bead to one surface. Assemble parts as normal. Any excess can be wiped away with a cloth. Store bottle upright at room temperature in a cool, dry place away from direct sunlight. Air space is required to keep contents in the bottle in liquid state.
RkJQdWJsaXNoZXIy MTIwNTUz