GENERAL 6 TAIL GATE STRIKER NOTE: Before removing mounting screws of the tailgate striker, do the markings on striker so that while refitting, the alignment of the tailgate will not change. 1. Remove two screws with the help of Allen key and take the tailgate striker out. Re-fitment of Striker: 1. Align tailgate striker with the marking and tighten two screws with Allen key. 2. Do Not Fit Striker in Reverse Direction GAS BALANCER ROD 1. Remove two c-clips provided on each side of balance rod with the help of screw driver. Pull out gas balancer rod from tailgate NOTE: Ensure tailgate is properly supported before balance rods are removed. Before mounting balancer rod on tailgate, apply some grease at the end of balancer rod. Insert balancer rod ends into ball points provided on tailgate. Insert c-clip inside balance rod at each end to lock the balancer rods in its place.
RkJQdWJsaXNoZXIy MTIwNTUz