STEERING 11 6. Loosen & remove the universal joint bolt (column side) between steering column & intermediate shaft. NOTE: Do not reuse the bolts. 7. Disconnect the electrical connector’s from the ECU. 8. Remove the steering column mounting bolts (4 no.). 9. Disengage the column assembly from intermediate shaft and take out the column. REFITMENT: For assembly follow reverse procedure of removal. 1.2.3.3 INTERMEADIATE SHAFT REMOVAL 1. Loosen the universal joint bolt between steering column & intermediate shaft. NOTE: Do not reuse the bolts. 2. Remove the universal joint bolt between intermediate shaft and rack & pinion assembly. NOTE: Do not reuse the bolts. 3. Disengage the intermediate shaft from rack & pinion assembly and take out the intermediate shaft. REFITMENT: For assembly follow reverse procedure of removal.
RkJQdWJsaXNoZXIy MTIwNTUz