SRS 20 10.6.9 FRONT SEAT MOUNTED SIDE AIRBAG (IF FITTED) Removal 1. Disconnect battery and wait for 2 minutes. 2. Unzip the front seat back from rear Side. 3. Unscrew the top & bottom air bag fixing nut M6 (2 Nos.) 4. Remove the Air Bag module from Seat frame NOTE: Take out the airbag module gently as Connector & pigtail should not be stretched 5. Disconnect the connector form Airbag Module. To remove the connector from Airbag module, Push the connector knob upward (towards Airbag) & then pull the connector down. Installation 1. Reconnect the side airbag module connector. NOTE: Click noise will come after proper insertion. There is Poka-Yoke in connector fitment so reverse side fitment not possible
RkJQdWJsaXNoZXIy MTIwNTUz