BODY 54 FOLLOWING GUIDELINES WILL HELP TO PROTECT BOLT FROM CORROSION PROPER CLEANING: In order to protect New BOLT / ZEST from corrosion it is recommended to wash BOLT and ZEST thoroughly and frequently in case: There is a heavy accumulation of dirt and mud especially on the underbody. It is driven in areas having high atmospheric pollution due to smoke, soot, dust, iron dust and other chemical pollutants. It is driven in coastal areas removed thoroughly so that these parts are not subjected to dampness that might be present in the mud. Make use of mud-flaps to protect the painted surface and wheel-arch coating from the abrasive action of mud and impacting stones. PERIODIC INSPECTION: Regularly inspect for any damage in the paint film such as deep scratches and immediately get them repaired, as these defects tend to accelerate corrosion. PROPER PARKING: Always park the vehicle in shade to protect it from harsh sunlight or in a well-ventilated garage so that there is no dampness on any part of the vehicle. WASHING NEW BOLT Follow these tips while washing new BOLT / ZEST. HAND WASH: Always wash in shade and when the surface is at room temperature. Wash with mild car wash soap like "Car Shampoo" and use a soft 100% cotton cloth to avoid scratches. Please take help of your dealer to buy the right products. Please be sure to remove the wristwatch and wear soft gloves to avoid scratches due to finger rings or nails. To remove stubborn stains and contaminants like tar, use turpentine or cleaners like "Stain Remover" which is safe for painted surfaces. Again your dealer can help you in selecting the right product. Avoid substances like petrol, diesel, kerosene, benzene or other solvents that cause damage to paint Dry the vehicle thoroughly to prevent any damp spots. Rinse all surfaces thoroughly to remove any traces of soap and other cleaners as this may lead to the formation of stains on the painted surface later.
RkJQdWJsaXNoZXIy MTIwNTUz