BODY 51 22. Also, remove the 3-mounting bolt of window winding regulator. 23. Pull out the glass from outside along with the glass-holding bracket. 24. Pull out the regulator along with the bracket through the panel hole from inside. 25. Remove Rear door glass run mould of glass guide channel. 26. Remove the door handle unit after unscrewing its screws from the other end. 27. Tighten the door lock adjusting screw in antic clock wise direction so that the clamp over the lock will slide out. (If applicable) 28. Remove the door lock unit. 29. Slightly slide outer gripper handle and pull it out.
RkJQdWJsaXNoZXIy MTIwNTUz