BODY 42 9.10.3 Removal and Refitment of Front Door Trims, Window Regulator, Latch and Door Handle: Removal: 1. Pull out the inside cover plate rubber boot of the ORVM. 2. Remove Inside cover plate using plastic. 3. Unscrew the 2 mounting screws by screw driver. 4. Remove the door release lever holding screws, as shown in fig. Insert wedge pin and pry out. 5. Disconnect the two linkages (lock and unlock) of the door release lever and remove it. 6. Insert wedge pin and remove window-winding switch from door pull outer.
RkJQdWJsaXNoZXIy MTIwNTUz