BODY 30 9.9.9 FASCIA INSTRUMENT CLUSTER WARNING: Remove the key from key barrel. This is necessary to ensure proper initialization of Instrument Cluster Parameters like Odometer value learning from Immobilizer and DTCs in other ECUs against Instrument Cluster. Removing Instrument Cluster with Key IN is strictly prohibited otherwise it will corrupt the odometer value. 1. Pull out the cluster bezel to remove cluster. 2. Remove four screws to remove cluster. 3. Pull out the Cluster towards arrow direction as shown in 4. Remove the wire harness connectors ASSEMBLY Swapping to analyse cluster defect: It is strictly prohibited to swap clusters for defect analysis from vehicles or from available stock. Due to immobilizer Odometer learning strategy, cluster odometer value will change permanently to a higher value. For defect analysis, use Diagnostics Tool or ETC (Engineering Test MODE). 1. Connect the wire harness connection. 2. Then properly align the instrument cluster. 3. Fit the cluster by 4 screws.
RkJQdWJsaXNoZXIy MTIwNTUz