BODY 24 9.9 BUMPER AND FASCIA ASSEMBLY 9.9.1 R+R of front bumper REMOVAL 1. Park the car on the two-post lift and lift it up. 2. Remove mudguard attached to the front bumper. 3. Unscrew the four fastener of the bumper attached to the dust shield and remove the dust shield as shown in fig. 4. Lower the car from the two-post lift to unscrew the below bumper fasteners. 5. Remove bolts from top side under hood. 4. Unlock the bumper by pulling it from its bracket. 5. Hold the bumper properly and remove it. REFITMENT 1. Properly align the bumper so that no gaps are seen in the matching face of bumper and the body. 2. Tighten the top fasteners. 3. Lift up the two post lift then align the dust shield and the bumper and tighten the fasteners. 4. Tighten fasteners below bumper end.
RkJQdWJsaXNoZXIy MTIwNTUz