STEERING 9 CAUTION Care should be taken such that self-cancellation lugs do not get damaged (self-cancellation lugs are shown in below figure with arrows). INSPECTION: Check for any damage to self-cancellation lugs, if found, replace complete steering wheel INSTALLATION: 1. Align the marks made on the steering wheel and the shaft. Install steering wheel on steering shaft 2. Tighten the steering wheel nut to the specified torque. Tightening torque (Steering wheel nut) = 4Kg-m 3. Fit horn pad (Press fit type). 4. Connect battery. 8.2.3.2 STEERING COLUMN REMOVAL 1. Disconnect the connection of battery. 2. Remove steering wheel (Refer Steering wheel removal procedure). 3. Remove combi switch assembly (Refer Electrical section).) 4. Remove all screw of nacelle bottom cover. 5. Remove combination switch. (Refer body section / Electrical section.) 6. Remove the dashboard (Refer body section). 7. Loosen the universal joint bolt between steering column & intermediate shaft. NOTE: Do not reuse the bolts.
RkJQdWJsaXNoZXIy MTIwNTUz