Automated Manual Transmission 59 Sr. no Name Connector 1 Solenoid valve 2 (gear engagement) solenoid 2 (gear engagement) 15. Disconnect the electrical connections for the gear selection solenoid valves. Sr. no Name Connector 1 Solenoid valve 3 (gear selection) solenoid 3 (gear selection) 2 Solenoid valve 4 (gear selection) solenoid 4 (gear selection) 16. Release the wiring from the retaining clip 17. Remove the electro-hydraulic selection system wiring. Wiring For Manual Gearbox Hydraulic Selection System on Hydraulic Selection Unit Fitment 1. Place the electro-hydraulic selection system wiring back in its housing. 2. Connect the electrical connections for the gear selection solenoid valves and engage the wiring with the retaining clip. 3. Connect the electrical connection for the even/R gear engagement solenoid valve. 4. Connect the electrical connection for the odd gear engagement selection solenoid valve. 5. Connect the electrical connection for the gear selection position sensor. 6. Connect the electrical connection from the gear selection position sensor. 7. Connect the electrical connection for the oil pressure sensor and engage the wiring with the retaining clips. 8. Connect the electrical connection for the clutch control solenoid valve. 9. Connect the electro-hydraulic selection system wiring coupling and engage the wiring with the retaining clip. 10. Connect the electrical connection for the gearbox input speed sensor and engage the wiring with the tank. 11. Fit battery support/drip tray. 12. Fit battery. 13. Fit protection/guard under engine 14. Remove the car from the lift
RkJQdWJsaXNoZXIy MTIwNTUz