Automated Manual Transmission 29 Clutch plate speed (this signal is detected by the sensor which reads the speed of the main shaft***): Check the state of the connections and the continuity of the wiring. If a fault is found restore/replace the wiring. Replace the clutch plate speed sensor and check the correct reading of the position by performing a series of gear changes. Car speed: Clutch plate speed sensor operation check with road test: 1. Connect diagnostic tool equipment. 2. In the Parameters environment, display: Engine rpm Clutch plate speed 3. Perform a road test at constant speed without performing gear changes (V ~ 30 km/h). 4. When driving observe the two selected parameters. 5. Check that there are not any significant fluctuations/differences of the clutch rpm signal compared with the engine rpm.
RkJQdWJsaXNoZXIy MTIwNTUz