DRIVETRAIN C549 44 B. DRIVESHAFT REMOVAL – RH SIDE: 1. The removal of wheel side joint is similar to that of LH side drive shaft. 2. Remove the fasteners and remove the right driveshaft complete with intermediate driveshaft use similar method to remove the transaxle side as used in LH side drive shaft. INSTALLATION 1. Follow the same procedure to refit the driveshaft as that of LH driveshaft, but make sure to place the intermediate driveshaft in its housing and secure its nuts. C. INTERMEDIATE SHAFT 1. Remove the right drive shaft following the procedure of DRIVESHAFT REMOVAL – RH SIDE. 2. Loosen collar (1a) and disconnect the intermediate driveshaft (1b) from the right driveshaft (1c). INSTALLATION 1. Connect the intermediate driveshaft to the right drive shaft and tighten the band.
RkJQdWJsaXNoZXIy MTIwNTUz