ENGINE 1.3L QUADRAJET (90PS) 97 E. EXHAUST PIPE REMOVAL NOTE Q Conduct the following procedure in Engine COLD condition, as the exhaust pipe will be HOT and may cause severe burns if handled in this condition. FRONT PIPE REMOVAL : 1. Loosen and remove the bolts (1) on the flange connecting front exhaust pipe to rear pipe and disconnect the pipes from each other. 2. Loosen the bolt (1) on the clamp holding the front exhaust pipe to exhaust outlet from engine and pull out the front pipe. 3. Disconnect the rubber hangers (1), while holding the front pipe to remove it completely from vehicle. INSTALLATION 1. For installation follow the reverse procedure of the removal. REAR PIPE REMOVAL 1. Loosen and remove the bolts on the flange connecting front exhaust pipe to rear pipe and disconnect the pipes from each other, for fig, refer step 1 of FRONT PIPE REMOVAL. 2. Disconnect the rubber hangers (1) and remove the rear pipe from the vehicle. INSTALLATION 1. For Installation follow the reverse procedure of Removal.
RkJQdWJsaXNoZXIy MTIwNTUz