ENGINE 1.3 QUADRAJET (75PS) 69 The fuel feed system consists of: 1. Fuel tank assembly 2. Fuel Intank pump 3. Fuel level gauge (tank unit) 4. Fuel level Indicator (dashboard) 5. Fuel filter 6. Fuel filler cap 7. Fuel hoses, fuel lines and Clamps 8. Assembly filler neck complete WARNING: Q Disconnect negative or positive cable terminal at battery. Q Before performing the following operation, release the fuel pressure from the fuel system to reduce the possibility of injury or fire. Q While removing the fuel t ank from the vehicle, keep sparks, cigarettes and open flames away from it. Q Before repairing fuel tank assembly, clean it thoroughly. Q Always wear safety glasses. Q A small amount of fuel may be released during repair work. To avoid the chance of injury, cover the pipe to be disconnected with cotton cloth. Do not use cotton waste. A. FUEL TANK The main function of tank is to store fuel and supply to Engine as per demand. The fuel tank is located under the rear seat of the vehicle. The fuel level gauge (Float Assy) is a part of the Intank Pump. 2. Fold rear seat in backward, after that remove the carpet, it shoes the location of the fuel tank. Removal: 1. Remove fuel filler cap. Warning: Before removing fuel tank assembly, release the fuel pressure from the fuel system to reduce the possibility of injury or fire. Fuel Pressure Relief procedure: (a) Start the engine, and then disconnect fuel pump electric connector located under middle floor carpet. (b) Let engine stall, turn “OFF” ignition switch and then disconnect negative cable at battery. (c) Disconnect fuel filler hose and breather hose from fuel filler Pipe. OR Remove any quick connector using cotton waste. Intank fuel pump unit Float Assy. REMOVAL OF FUEL TANK UNIT:
RkJQdWJsaXNoZXIy MTIwNTUz