ENGINE 1.3 QUADRAJET (75PS) 59 22.Replace the engine oil filter mounting complete with the engine oil filter and engine oil filler fitting and secure by tightening the M6 bolt s to the specified torque of 0.8 ~ 1.0 Kg-m. NOTE : Q Ensure the gasket is present, undamaged and correctly positioned. 23.Place the water pump rigid inlet pipe, complete with O-ring in position and secure it using the bolts. NOTE : Q Fit the rigid pipe in the crankcase very carefully to ensure the O-ring is correctly positioned. 24.Place the rpm sensor in its housing and secure it by tightening the M6 bolt to the recommended torque of 0.8 ~ 1.0 Kg-m . 25 Fit the engine oil heat exchanger protection.
RkJQdWJsaXNoZXIy MTIwNTUz