ENGINE 1.3 QUADRAJET (75PS) 47 23.Check that the crankshaft end float corresponds to the recommended figures of 0.055 ~ 0.265 using a magnetic base and dial gauge. NOTE : If the value for the crankshaft end float does not correspond with the recommended figures, use suitable oversize thrust washers. 24.Remove the crankshaft (1a) complete with rear oil seal (1b). 25.Remove the upper main journal half-bearings. 26.Remove the bolts (1a) and remove the engine oil jets (1b). 27.Remove the lower engine block locating bushes. 28.Use an appropriate tool to support the upper engine block. 29.Unscrew the ret aining bolts and separate the upper crankcase from the overhaul stand plate. 30.Position the upper crankcase on a suit able workbench.
RkJQdWJsaXNoZXIy MTIwNTUz