Revotron 1.2T 107 7. Move the valve spring compressor rail to the exhaust side of the cylinder head. 8. Repeat the procedure for exhaust port, noting the locations and components for each valve for proper reassembly. 9. Remove Valve Guide Seal. 10. Remove the Intake valve and exhaust Valve from cylinder head. viii. Removal of Cylinder Block SubAssemblies 1. Remove the mounting nuts holding the connecting rod bearing caps. 2. Remove the connecting rod bearing caps along with bearing shells. NOTE • While removing each bearing shell, mark on its back in case of reuse. • Connecting rods have to be assembled to the respective bearing caps, matching with serial numbers. 3. Turn crankshaft to bring piston to top dead center. 4. Remove piston assembly from the cylinder block using wooden handle of the mallet. 5. Follow the same procedure to remove the remaining two pistons.
RkJQdWJsaXNoZXIy MTIwNTUz