Revotron 1.2T 105 3. Remove the Cylinder Head attaching bolts along with the washers, starting from the ends of the cylinder head and working inwards to the center. (Refer the loosening sequence) 4. To dislocate cylinder head, use a soft mallet or dead-blow hammer to break the head free from the block, if necessary. 5. Place the cylinder head on the dismantling table. vii. Removal of Cylinder Head SubAssemblies NOTE • Gently unscrew the tappet setting screw to relieve the spring load, before dismantling the rocker shaft. • To avoid damage to valve tips, do not rotate the camshaft. 1. Remove the Rocker Shaft Holder Screw, from the camshaft bearing block. 2. Carefully drive the rocker shafts out of the cylinder head using a suitable hammer and drift. NOTE • When removing the rocker shafts, collect the rocker arms, springs, and seats, noting the specific location of each component.
RkJQdWJsaXNoZXIy MTIwNTUz