ELECTRICAL 45 INSPECTION OF HORN: Connect the positive terminal of the horn to battery (+) and negative terminal to battery (-). If a clean and sharp sound is heard, the horn is OK. If no sound is heard, check continuity of the horn coil using a multimeter. If the coil is OK, check the settings of the setting screw. Adjust the setting screw till a clean and sharp sound is given out. REFITMENT OF HORN: 1. Refit horn at its place. 2. Connect press Fit Horn Connector. 3. Refit front bumper. HORN –TORQUE VALUE TABLE APPLICATION TORQUE Horn MTG Bkt 0.95 to 1.0 Kgfm
RkJQdWJsaXNoZXIy MTIwNTUz