ELECTRICAL 31 Rear right / left turn signal lamps not working 1. Grounding point no. E1(RH) or E2 (LH) loose Tighten grounding properly 2. 8 pole Rear Lamp Connector loose Fix the connector properly 3. Bulb fused Fix the bulb properly. Replace bulb if blown Both Turn Indicators not working 1. Flasher fuse (10A) in cabin fuse box loose/blown(BASE & MID) Fix fuse properly in the base. Replace fuse if blown 2. Flasher in cabin fuse box faulty(BASE & MID) Replace Flasher 3. No output from BCM (HIGH) Refer BCM Diagnosis Side repeater lamps not working 1. Connectors (2 pole) at the lamps loose Connect the connectors properly 2. Bulb loose/ blown Fix the bulb properly. Replace bulb if blown 3. Grounding point no. Tighten grounding properly E6 (RH) or E12 (LH) loose 4. No output from BCM (HIGH) Refer BCM Diagnosis Indicator lamps not working when hazard warning switch is operated 1. 8 pole connector at the front facia panel switch loose Fix the connector terminal properly 2. Hazard warning switch faulty Replace switch 3. No output from BCM Refer BCM diagnosis Reverse lamp not working 1. Grounding point no. E00 loose Tighten grounding properly 2. Bulb fused Replace bulb if blown 3. 8 pole tail lamp connector loose. Fix the connector properly Stop(Brake) lamps not working 1. 8 pole tail lamp connector loose Tighten the connector properly 2. Bulbs fused Fix the bulbs properly. Replace bulbs if blown 3. Brake lamp switch faulty Replace switch Stop(Brake) Lamp and High Mounted Stop Lamp not working 1. Stop Lamp and High Mounted Stop lamp 5A Fuse in Cabin Fuse Box Blown Replace Fuse
RkJQdWJsaXNoZXIy MTIwNTUz