BODY 22 5. Loosen and remove screws which are inside the wheel arch LH & RH. 6. Take care that the hood seal is removed for easy removal of bumper. 7. Pull out the bumper edges from the wheel arch. 8. Take care that the hood seal is removed for easy removal of bumper. 9. Disconnect the electrical connections. FITMENT For fitment follow the reverse procedure of removal. 1.4.8. FRONT DOOR REMOVAL 1. Remove electrical connection of door wiring harness. 2. Remove the check strap. NOTE Before fitting the check strap apply grease on it. Grease type (Maker, Type): KLUBER, POLYLUB 801. Regreasing interval: 6 Months or 10,000km within.
RkJQdWJsaXNoZXIy MTIwNTUz