SUSPENSION 34 B. Lower arm Rear pivot bush Removal: 1. Remove rear pivot bush using special tools as shown in below arrangement. NOTE: Apply soap and water to the bush, the inner surface of the tool and the bore of assembly lower link before installation. Installation: 2. Install rear pivot bush using special tools as shown in below arrangement. INSTALLATION OF SUBFRAME ASSEMBLY 1. Assemble the ball joint assembly to the lower arm. 2. Position the lower arm to the Subframe and tighten its front and rear pivot bush bolts. 3. Assemble anti roll bar to Subframe 4. Assemble the steering rack assembly to Subframe.
RkJQdWJsaXNoZXIy MTIwNTUz