1.5L REVOTORQ ENGINE 195 CONNECTOR DETAIL PINOUT DETAILS Pin No Description 1 Wheel Speed Sensor Signal 2 Wheel Speed Sensor Supply Precautions while handling wheel speed sensor. 1. Storage temperature (-400C to +500C) should not be exceeded. 2. Avoid free fall of the sensor. 3. The sensor tip should not be scratched. 4. Sensor should not be exposed to strong magnetic field. 5. Tightening torque : 8 ± 2 Nm. iii. CAMSHAFT POSITION SENSOR The cam sensor is fitted on the cylinder head cover. The cam sensor is a magnetic field sensitive transducer and generates a voltage output proportional to the rate of change of the magnetic field near a "camshaft lobe" configuration. The cam sensor senses the position of the flag on the Exhaust camshaft and gives feed back to the ECU regarding the cylinder No.1 (90ºBDC). The sensor gap should be 1±0.4mm. If the gap is not correct and also the position of camshafts with respect to crank shaft (set during assembly), the engine will not start. While the engine is running & the cam sensor fails then the engine will continue to run till the engine will stop & will not start again. SENSOR LOCATION
RkJQdWJsaXNoZXIy MTIwNTUz