1.5L REVOTORQ ENGINE 156 3. Turn the Crankshaft and bring a pair of pistons near BDC position. Unscrew connecting rod bearing cap mounting nuts. 4. Push the piston assemblies out of cylinders using wooden handle of mallet. 5. Remove connecting rod bearing shells and duly mark them with paint on their back in case these are to be reused. 6. Verify serial numbers on connecting rod bearing caps and connecting rods. 7. Remove remaining pistons in a similar manner. NOTE It is essential to assemble connecting rod bearing caps to their respective connecting rods only. 8. Unscrew and remove main bearing-cap mounting bolts. NOTE Mark the bearing cap locations. Follow the following sequence for removing; 1st and 2nd and 4th and lastly 3rd. 9. Remove all the lower main bearing halfs.
RkJQdWJsaXNoZXIy MTIwNTUz