1.5L REVOTORQ ENGINE 107 3. Remove the air filter to access the catcon mounting to TC on vehicle. (For Removal procedures refer Air filter removal). 4. Loosen and remove the mounting fasteners and remove the catcon assembly. FITMENT For fitment follow the reverse procedure of removal. NOTE Flushing operation for cleaning the catalytic converter should be done by directing dry compressed air draft in the direction of catalytic converter inlet, after removing it from the vehicle. E. EXHAUST PIPE FITMENT PROCEDURE 1. Match hot end flange & exhaust front pipe flange holes with gasket in between and hand tighten the nut. 2. Match bracket on engine and bracket on front pipe holes and hand tighten the bolt. 3. Tight the front pipe flange & hot end flange nut by pneumatic tool & apply torque-2.3 kgf.m. 4. Tight the front pipe mounting bracket bolt by pneumatic tool & apply tightening torque-2.3 kgf.m.
RkJQdWJsaXNoZXIy MTIwNTUz