1.5L REVOTORQ ENGINE 54 8. Drain the coolant reservoir and rinse out any sediment. 9. Use fresh water to reverse flush the radiator from the drain to the coolant reservoir bottle. 10. Secure the coolant reservoir bottle in the engine compartment using the fasteners removed previously. 11. Close the coolant drain plug on the radiator. 12. Add the recommended brand of pre-mixed 40:60 ratio coolant to the reservoir until the coolant level is at the 'MAX' mark on the bottle. 13. Start the engine and gradually increase engine speed to allow the engine to reach 85- 90o C, which allows the thermostat to open. 14. Allow the engine to return to idle speed. 15. Stop the engine and allow to cool sufficiently. 16. Add pre-mixed 40:60 ratio coolant to the reservoir until the coolant level is at the 'MAX' mark on the bottle. iii. AIR FILTER ELEMENT REPLACEMENT DESCRIPTION Proper maintenance of the air filter is essential for vehicle performance and fuel economy. The air filter element removes foreign material such as dust, dirt, and other material from the intake air, thereby preventing the engine from damage due to contaminated air. Inspect and clean the air filter element at every routine service. Replace the air filter element as per service schedule. REMOVAL 1. Park the vehicle on a level surface, engage the parking brake, and raise the hood. 2. Unscrew the top three mounting bolts of air filter assembly & one locator point at back side. 3. Detach the cover through hinge action, with clamp and snorkel intact with cover. 4. Remove the air filter element. 5. Gently tap loose any dirt or debris from the filter. Clean the housing and air ducts as well. Take care not to allow dirt and debris to enter the air inlet to the engine.
RkJQdWJsaXNoZXIy MTIwNTUz