FATC 16 2. BLOWER SPEED CONTROL KNOB a. Rotate the knob clockwise to increase the blower speed up to MAX (Speed 7), whereas anticlockwise would reduce the speed up to Min (Speed 1). Blower control shall indicate the control of the quantity of airflow, which is accomplished by controlling the speed of the blower fan. The Blower control shall happen either manually or through an automatic climate control algorithm 3. ECON MODE During ECON AC operation, the system automatically cuts off compressor at a higher temperature than normal AC. The operation can be used during mild weather conditions for better fuel efficiency. Comfort level may be compromised during this operation. 4. MAX DEFROST BUTTON a. This button directs the main airflow towards windscreen for faster defrosting (It also overrides any mode selection you may have made.) b. When you turn off the button, the system returns to its former settings. On pressing this button the LED is illuminated indicating air distribution to max defrost mode is ON. CAUTIONS For your safety make sure you have a clear view through all the windows before driving. 5. REAR WINDOW DEMISTER – HRW (IF APPLICABLE) This button turns the rear window demister ON or OFF. The system automatically deactivates. On pressing this button, the LED is illuminated indicating defogging of the rear window. Rear demister/defogger will work only when Engine is ON. 6. FRESH AIR / RECIRCULATION BUTTON a. When the user pushes the Fresh air \ Recirculation button , the LED turns ON, the air inlet door flap shall move to the RECIRCULATION position and air from the vehicle’s interior is sent throughout the system. b. When the user pushes the Fresh \ Recirculation button and the LED turns off, air is brought in from outside of the vehicle (fresh mode). Whenever discomfort is felt, switch to fresh air mode. c. The Fresh \ Recirculation control shall switch to Auto operation immediately after the user presses the Auto button. The Climate control algorithm shall calculate the status of the Fresh \ Recirculation door flap. The LED shall not indicate the status of the door flap during Auto operation. NOTE 1. The outside air intakes for the climate control system are at the base of windscreen. Keep this area clear from leaves and other debris. 2. The system should be used with recirculation air mode for faster heat up and cool down, however keeping the system in recirculation mode, particularly with AC OFF, can cause the windows fog up.
RkJQdWJsaXNoZXIy MTIwNTUz