ELECTRICAL 225 5. Do not add any accessory, which will obstruct camera field of view. CLEANING CAMERA 1. Due to environmental reasons, dust, mud or fog may accumulate on the camera lens. So regularly clean the camera lens. 2. Use water to clean the camera lens. Do not use extreme cold extreme hot water. Rapid changes in temperature may brittle the camera lens. 3. Wipe the camera lens with soft cloth. 4. Do not use hard cloth or material to wipe the camera lens. This will cause scratches on the camera, and leads to deteriorated visual image on the display. 5. Do not apply organic solvent, car wax, window cleaner or glass coat to clean the camera. If this is applied, wipe it off as soon as possible. 6. Do not apply heavy force on lens, while cleaning. 7. Do not remove mud, snow on the camera lens using stick or hard material 1.30.2 ECU TO SENSOR ELECTRICAL INTERFACE Ultrasonic sensors shall be mounted on the rear bumper and hardwired to the PDC ECU. PDC ECU shall power and control the sensors. Both power and ground of the sensors shall be connected to the PDC ECU itself. In some vehicles, ‘Park Assist Button’ in facia switch bank may not available. In this case, please ignore this chapter.
RkJQdWJsaXNoZXIy MTIwNTUz