AMT KIT 24 D. DC MOTOR REMOVAL AND RE-FITMENT: Removal Remove Oil tank (Refer oil tank removal procedure). Disconnect the connector of the wiring harness from the ‘DC Motor’. Unscrew the three fixing screws M5x15. Remove the electric ‘DC Motor’, the ‘Sponge’ and the ‘Oldham Joint’. INSTALLATION: Insert the ‘Oldham Joint’ in the pump shaft. Using a screw driver, turn the joint as shown below, to align its slot with the axis passing through the two fixing threaded holes at 180° on the ‘Power Unit Base Plate’ body. Turn the ‘Dc Motor’ shaft by hand as shown below, to align it with the axe Passing through the two fixing hole at 180°.
RkJQdWJsaXNoZXIy MTIwNTUz