AMT KIT 20 Tighten screw at the right torque 10 ± 1 Nm. Connect the connector of the wiring harness on the ‘Transmission Control Unit’. Fill the ‘Oil Tank’ with new ‘CS Speed’ oil, up to the Max. Level “@ 0 bar” (no pressure in the hydraulic circuit) and restore it after the purge procedure. Screw the ‘Oil Tank Cap’ at the right torque 2 - 0.5 ± 1 Nm.
RkJQdWJsaXNoZXIy MTIwNTUz