BODY 17 24.Remove one screw at front of BCM. 25.Remove all wiring harness connections. 26.Remove solar load sensor mounted near demisting vents. (If applicable). (For procedure refer solar load sensor removal process in HVAC section). 27.Disengage three locators located on BIW plenum panel brackets and two locaters at front ends. 28.Remove the dashboard, while removing Dashboard carefully disengage HVAC system (If applicable) behind the glove box. FITMENT For fitment follow reverse procedure of the removal. 9.2.4 CROSS CAR BEAM WITH COCKPIT ASSEMBLY REMOVAL 1. Disconnect the battery terminals. 2. Remove the front doors LH and RH both. (For procedure refer front door removal process). 3. Remove steering column universal joint mounting bolt and disconnect the joint. 4. Remove floor console assembly. (For procedure refer floor console removal process). 5. Pry out the push rivet and take out the RH side valance panel.
RkJQdWJsaXNoZXIy MTIwNTUz