BODY 11 6. Disconnect the cable from hood release lever. 7. Pull out and remove the cable from the engine compartment. CAUTION Do not pull the hood latch cable from inside of cab it can damage the rubber grommet. FITMENT NOTE Check the condition of the rubber grommet, if found damaged replace the same at the time of fitment. For fitment follow the reverse procedure of removal. 9.2.2 FLOOR CONSOLE REMOVAL NOTE For ease of removal and fitment the hand brake cable can be loosened from the rear end. (For the hand brake adjustment, refer brake section.) 1. Remove the gear lever boot. (For procedure refer the gear lever boot removal process.) 2. Remove rear cup holder console. 3. Remove rear screw of central floor console.
RkJQdWJsaXNoZXIy MTIwNTUz