STEERING 10 2.3.2 STEERING COLUMN REMOVAL 1. Disconnect the connection of battery. 2. Remove steering wheel (Refer Steering wheel removal procedure). 3. Remove 2 nos screws of nacelle bottom cover & take out the nacelle bottom cover. 4. Remove the mounting nut of steering column. 5. Remove combination switch. (Refer body section / Electrical section.) 6. Remove the clock spring. (Refer body section / Electrical section.) 7. Remove the dash board bottom cover (Refer body section). 8. Disconnect the electrical connector’s from the ECU. 9. Remove the bolt nut of the lower mounting bracket of steering column which is mounted on CCB. 10.Remove the 2 nos mounting nuts. CAUTION Hold the steering column to aviod sudden fall and damage to steering column while removing mounting nuts of column. WARNING Hold the steering column to aviod sudden fall of the steering column that can cause injury to operator. 11. Remove the mounting screw of upper universal joint. 12.Disengage the steering column assembly from the upper universal joint and take out the steering column.
RkJQdWJsaXNoZXIy MTIwNTUz