SUSPENSION 40 11. Detach the hand brake cable from the lever on the trailing shoe by moving the lever towards the center of the brake and removing the cable nipple from its location in the end of the lever as shown in Figure. FIG. 74 12. Remove the hand brake cable holder lock pin from the back plate FIG. 75 13. Remove the mounting bolt of hand brake cable on the twist beam axle 14. Disconnect the brake lines mounting on the twist beam as shown in Fig. FIG. 76 15. Remove the stub axle and back plate along with brake shoe assembly as shown in Fig. FIG. 77 NOTE: Apply adhesive thread locker HS TS: 25408 on anchor plate mounting bolts (thread locker code no: 56506 00256 2) for fitment. 16. Remove the shock absorber lower bolts (Refer removal and refitment of shock absorber).
RkJQdWJsaXNoZXIy MTIwNTUz