SUSPENSION 38 9.3. REMOVAL AND INSTALLATION OF TORSION BEAM REMOVAL: 1. Position the vehicle in the two post lift. 2. Remove the wheel cap and loosen wheel nuts. 3. Lift the vehicle using two post lift. 4. Remove the wheel. 5. Slacken off the hand brake cable. 6. Insert a screwdriver through the hole in drum and press against the hand brake lever. FIG. 68a FIG. 68b 7. A ‘click’ will be heard as the lever moves down. This movement compresses the pistons in the wheel cylinder and thereby increases the clearance between the brake shoes and the drum. FIG. 69 8. Remove the brake drum by unscrewing the stub axle nut as shown and gently tapping by mallet. FIG. 70
RkJQdWJsaXNoZXIy MTIwNTUz