1.05L REVOTORQ ENGINE 132 6. Install connecting rod bearing caps with mounting nuts. iv. FITMENT OF CYLINDER HEAD ON CYLINDER BLOCK : 1. Place the Cylinder Head gasket as shown. NOTE Ensure that the "TOP" mark on the gasket is facing towards the intake manifold side of the block. Piston Projection MM Gasket Thickness MM Identification 0.66 - 0.69 1.3 1 Notch 0.70 - 0.79 1.4 2 Notch 0.80 - 0.89 1.5 3 Notch 2. Tighten the cylinder head mounting bolts from the outer to inner, in specified sequence. 3. Install the exhaust and intake cam shaft by aligning reference points on the gears as shown.
RkJQdWJsaXNoZXIy MTIwNTUz