1.05L REVOTORQ ENGINE 123 ix. Piston Connecting Rod Disassembly : 1. Remove piston pin circlip with suitable plier. 2. Remove piston pin from the piston by pushing it out using a soft drift 3. Remove the connecting rod Inspection : Connecting Rods : 1. Inspect connecting rod small end bush and if necessary, replace it. 2. Check connecting rod small end parent bore dimension. 3. If necessary machine connecting rod small end parent bore to next over size. 4. Ensure that connecting rod big end and small end axis are parallel to each other and are within specified limits. 5. Ensure that the centre distance between small end to big end is maintained within specified limit. 6. Smear oil on parent bore of connecting rod. Note : If required Machine the side faces of bush to match the taper faces of connecting rod. 7. Finish connecting rod small end bush bore on a connecting rod boring machine. 8. Alternately connecting rod small end bush may be reamed. The end edges to be chamfered / deburred manually. 9. Install connecting rod bearing caps without bearing shells on connecting rod.
RkJQdWJsaXNoZXIy MTIwNTUz