1.2L REVOTRON ENGINE 123 7. Turn crankshaft to bring piston to top dead center. 8. Remove piston assembly from the cylinder block using wooden handle of the mallet. 9. Follow the same procedure to remove the remaining two pistons. 10. Using suitable pliers, remove piston pin round wire circlip. 11. Remove the connecting rod bearing caps along with bearing shells. 12. Remove gudgeon pin from the small end of connecting rod. 13. Remove connecting rod. NOTE Keep each piston and gudgeon pin as a set, when removed. 14. Using ring expander, remove piston rings 15. Insert flywheel locking pin to lock flywheel. 16. Remove flywheel mounting bolts and then flywheel locking pin.
RkJQdWJsaXNoZXIy MTIwNTUz