TIAGO

SUSPENSION 31  INSTALLATION: 1. Proceed in the reverse order of fitment. 2. Replace rubber bushes, worn damaged parts. 3. Tighten the rear mounting bracket bolts with proper torque. 4. Insert the lower link ballpin in to knuckle and tighten the nut. 5. Insert the tie member and tighten the nuts. 6. Tighten the Vertical member. NOTE : Ensure the position & orientation of the Clamp of the vertical member as shown in FIG. 44a & 44b. FIG. 44 a FIG. 44 b 7. Ensure that heat shield is assembled properly on ball joint 5.7.6 REMOVAL AND INSTALLATION LOWER ARM BALL JOINT:  Removal: a) Support (part no. 5427 5890 32 01) to be used for ball joint removal. FIG. 45 b) Circlip to be removed before dismantle the ball joint assembly from control arm. c) Push out load to be applied on sealing periphery (peened area) using special tool (part no 2834 5890 2614) without contacting the back plate. FIG. 46