TIAGO

1.05L REVOTORQ ENGINE 100 B. Fuel Filler : Removal : 1. Refer precautions and relieve fuel pressure. 2. Press spring clips for fuel filler hose and breather pipe (1) and (2) respectively and pull out from tank end. 3. Open the fuel flap, remove the filler cap and then loosen and remove fuel filler mounting hex flange screws. INSPECTION  Check if dust has blocked the 2 way cap, change cap if found defective. 4. Loosen and remove fuel filler pipe clamp bolts. 5. Take out fuel filler assembly from bode shell. WARNING  A small amount of fuel may be released after fuel lines are disconnected. To avoid the change of injury, cover the pipe to be disconnected with cotton cloth. Do not use cotton waste. CAUTION  To avoid damage to vapour hoses while disconnecting, slide back the clamps then twist the lines as you pull. Fitment : Follow the reverse order of removal for fitment.