TIAGO

1.2L REVOTRON ENGINE 100  FUEL FILLER AND BREATHER HOSE REMOVAL 1. Place the vehicle in a 2 poster lift. 2. Refer precautions and relive fuel pressure. 3. Remove fuel filler cap by removing fuel filler mounting hex flange bolts. 4. Remove the hose holding bracket by unscrewing the fastener. 5. Remove the fuel filler and breather hose clamps from tank side. 6. Take out fuel filler assembly along with breather from body shell. INSPECTION Check if dust has blocked the 2 way cap, change cap if found defective. WARNING  A small amount of fuel may be released after fuel lines are disconnected. To avoid the chance of injury, cover the pipe to be disconnected with cotton cloth. Do not use cotton waste.. CAUTION  To avoid damage to vapour hoses while disconnecting, slide back the clamps then twist the lines as you pull. FITMENT Follow the reverse order of removal for fitment.