TIGOR EV_ZIPTRON_SERVICE MANUAL

HV ELECTRICAL SYSTEM 80 STEP 2  Add 1.5mm THK washer at A mount to arm joint.  SCR M10X1.25X30 TS17070 10.9SS8451S2-YH ,- 4 Nos. Do torqueing as recommendation.  NYLOC NUT M10 IS7002-10-SS8451S2- YH ,- 1 Nos. Do torqueing as recommendation.  H/FL BOLT M10X40 TS17130- 10.9SS8451S2-YH- 3 Nos. Do torqueing as recommendation.  H/FL BOLT M8X28 TS17130 10.9SS8451S2-YH, NYLOC NUT M8 IS7002- 8-SS8451S2- 3 Nos. Do torqueing as recommendation.  HEX. FL. NUT M12X1.5 - 10 ISO12126, Do torqueing as recommendation.  Torqueing sequence for Mount to brackets & Cradle.  TIGHTENING TORQUE 5.5-6.0 Kg-m 6.0-6.5 Kg-m 6.0-6.5 Kg-m 3.0-3.5 Kg-m 10.0-11.5 Kg-m STEP 3  C mount bracket is bolted with transmission assy.  FL SCR M10X1.25X25 TS17130 8.8SS8451S2-Y ,- 4 Nos. Do torqueing as recommendation.  FL SCR M10X1.5X40 8.8 GRADE, 2 Nos. Do torqueing as recommendation.  Torqueing sequence for C Mount Bracket to transmission  INITIALLY APPLY PRE TORQUE OF 20 Nm AS PER SEQUENCE AND THEN APPLY FULL TORQUE= 4.5-5.0 Kg-m  TIGHTENING TORQUE= 4.5-5.0 Kg-m