TIGOR EV_ZIPTRON_SERVICE MANUAL

HV ELECTRICAL SYSTEM 77 C. CRADLE FITMENT STEP 1  Locate motor, inverter and gearbox assy on cradle assy; use loctite-243 thread locker and hand tight all  Hex Fl Bolt M10x1.25x65 IS13726 8.8SS8451S2-Y, - 3 Nos.  WASHER A10.5 IS5370 ST SS8451S2-Y - 3 Nos.  SPRING WASHER B10 IS3063 SS8451S2-Y - 3 Nos STEP 2  Locate bracket assembly RH side motor mount with non-drive end assembly faces of motor, inverter and gearbox assembly and with cradle assembly.  Locate & hand tight all 4 bolts  Hex Fl Bolt M10x65 IS13726 8.8SS8451S2-Y, - 4 Nos.  WASHER A10.5 IS5370 ST SS8451S2-Y (3 Nos)  SPRING WASHER B10 IS3063 SS8451S2-Y (3 Nos)  Apply recommended torque to the 4 bolts (2) in diagonally opposite fashion STEP 3  First mount dc-dc converter and onboard charger unit on bracket assy charger + converter mtg.  Hex Fl Screw M6x14 TS17070-8.8SS8451S2- Y (4 Nos) Apply Specified Torque.  Hex Fl Screw M6x20 TS17070-8.8SS8451S2- Y (4 Nos) Apply Specified Torque.