TIGOR EV_ZIPTRON_SERVICE MANUAL

BODY 31 4.16. REAR DOOR TRIM REMOVAL 1. Open the Door. 2. Pry out Pull cup Cap. 3. Remove mounting screw below Pull cup Cap. 4. Insert wedge pin and remove switch bezel pull cup. 5. Disconnect the window winding connection and remove the switch. 6. Disconnect the pop up knob link by rotating it in anticlockwise direction from the clip on the door shell. 7. Remove door trim screw, which is located at the bottom of door. 8. Remove door trim screw, which is located at center.