TIGOR EV_ZIPTRON_SERVICE MANUAL

FATC 30 REMOVAL 1. Access the linear power module location from co- drivers side. Remove the electrical connection from the module. 2. Remove the mounting screws and take out the module along with the cover. 3. Remove the mounting screw of the module and take out from the cover. FITMENT For fitment, follow reverse procedure of removal. H. PTC HEATER LOCATION Temperature sensor is placed at the discharge air side of PTC heater. It measures discharge air tem- perature of PTC heater and send signal to FATC. If sensor disconnected then PTC heater will not oper- ate.