TIGOR EV_ZIPTRON_SERVICE MANUAL

FATC 26 INSPECTION Measure the resistance between terminals of the sensor at minimum two temperatures. The resistance value should match with stated values of resistance in table below T (˚C) R Gerber (Ω) Tol (K) U (V) -10 16567.3 ± 277.6 ± 0.30 2.5261 ± 0.0347 0 9773.2 ± 118.4 ± 0.25 2.2035 ± 0.0310 +10 5953.9 ± 102.8 ± 0.36 18366 ± 0.0327 +20 3737.3 ± 79.0 ± 0.50 14661 ± 0.0323 +30 2412.0 ± 57.6 ± 0.60 11297 ± 0.0295 REMOVAL 1. Remove the Front bumper. (For removal, refer Font Bumper removal procedure in Body Section). 2. Disconnect the electrical connection. 3. Pull out the OAT sensor from the location. FITMENT For fitment, follow reverse procedure of removal.