TIGOR EV_ZIPTRON_SERVICE MANUAL

WHEELS AND TYRES 18 XZ+ (HyperStyle) VARIANT 1.Loosen wheel bolts by approximately 180 deg (half a rotation) 2.Lift the vehicle using two post lift. 3.Remove bolts and then wheel. NOTE: 1. Clean all parts and remove any buildup of corrosion of any parts, before installation of the wheel. 2.Never heat any part to loosen tight wheel, it will shorten life of wheel. 3.Wheel bolts must be tightened in sequence given in Fig and to proper torque to avoid bending wheel or brake disc. WHEEL COVER (HYPERSTYLE VARIANT) Hyper style cover is not required to remove regularly. If required to remove, follow the below procedure at service center only. 1. Insert the tool as shown. NOTE a. Insert the tool in GREEN circled area. b. Do not insert the special tool in RED circled area, locking webs may damage due to this insertion. 2. Make a gap around the cover by tool & then removed by hand. 3. When installing the cover, make sure that it is positioned so that it does not cover the air filling valve. Apply equal pressure at the circumference of the wheel cover to fix it in the wheel rim.